仕様概略
Panel Maintenance function-2
3. How to activate the Panel Maintenance function
3-1. Flow of Panel Maintenance-1 mode (It takes about 10 min.):
The Panel Maintenance-1 mode is automatically activated when the TV is turned off with remote control
after watching TV for 3 hours or more.
Turn off by
remote control
Panel Maintenance-1mode
(for about 10 minutes)
Finish
(No display)
LED: Orange lighting
Back to normal standby
LED: Red lighting (or Orange）
*North & Latin America models(U/C/X/W) No lighting
1. TV turns off by remote control after watching TV for total 3 hours or more
*1: When TV operating time after Panel Maintenance-1 mode
is within 3 hours, this mode is not activated.
*2: When the TV is turned off with mains power switch,
this mode is not activated.
*1
*2
Watching TV
For total 3 hours
(Watching time is reset)
81
OLED
Automatically start
without any notification.
The customer don’t notice about this mode. (Just LED is orange lighting.)
To Next Page
Loading...
