Panasonic Omnivision PV-8450 - Time Stamp Feature

I^C Check list before you begin.
n Clock is set to correct time.
2
3
b
c
• When the VCR is
connected to a
Combination VCR
which has a Blue Back feature, <>
even if the VCR Blue Back is set
to “OFF" on the VCR, the screen
will go to blue back.
Time Stamp Feature
Whenever a recording is made, the VCR automatically writes the following
program data on the tape: Date, Start time, Scheduled stop time (for Timer
Rec. only), Channel No., Category (for Timer Rec. only). About 7 seconds
after playback is started, this information will be displayed for 5 seconds.
1 Press ACTION to display the menu.
2 Press AT to select “SET UP
FEATURE," and then press ► to
display the “SET UP FEATURE" screen.
3 Press ► to select “ON” or "OFF."
• When “OFP Is selected, the program data is
written on the tape, but will not be displayed
for the first 5 seconds of playback.
-MENU
SET UP VCR
ISET UP FEATUREl
SET CLOCK
SET UP CHANNEL
tDIOMA/ LANGUE; ENGLI SH
SELECT:A ▼ KEY
SET : ► KEY
END :ACT ION KEY
- SET UP FEATURE -
: OFF
• V
SET : ► KEY
END : ACT I ON KEY-
4
Press ACTION twice to exit.
<Time Stamp Example>
Normal/
One Touch Recording
12/2B/199B MON
12:00PM
CH 08 ABC
Timer Recording
12/28/1998 MON
12:00PM - 1;00PM
CH 08 ABC SPORTS
When Clock is not set...
r •'
—/—/-
CH 08 ABC
• If the tape speed is changed immediately after recording begins,
the display may be incorrect. .
Blue Back ON/OFF Feature
You may choose whether or not you want the VCR to display a solid blue
back screen when the broadcast signal is very weak.
3 Press ACTION to display the menu.
VCR,” and then press ► to
display the "SET UP VCR” screen.
C Press AT to select “NOISY CH
BLUE BACK,” and then press ^
to select “ON” or “OFF.”
• When “ON” is selected, a solid blue screen
appears whenever the signal is weak or
nonexistent. When “OFP is selected, the picture
is displayed regardless of the signal condition.
b Press AT to select “SET UP
MENU
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
ID10MA/ LANGUE:ENGLI SH
SELECT:A T KEY
SET : ► KEY
END : ACT I ON KEY
REPEAT PLAY ; ON
BEEPER
ON
ON
SELECT
:A T key
SET : ► KEY
END :ACT ION KEY
• The picture can not always be seen clearly when “OFP is selected.
d Press ACTION twice to exit.
21
More
You
Can
Do