Panasonic Omnivision PV-8450 - Special VCR Features; VCR Lock Feature

Special VCR Features (continued)
^Important: If the remote control POWER. ACTION, PROG, CHA/T , INDEX, or ADD/DLT button does not
work when pressed, press the VCR button on the remote and try the button again.
Check list before you begin.
Q All connections are made.
(See pages 6~9.)
Q VCR is plugged in.
□ TV is turned on and set to the VCR
channel (CH 3 or 4),
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature may be used to keep young children
from operating the VCR.
Hold down REC/TIME on the
VCR without a cassette inserted
for 7 seconds while in Stop mode.
r
VCR LOCK ACTIVATED
REOTIME
To Cancel the VCR Lock feature,
with or without a cassette inserted,
hold down REC/TIME on the
VCR for 7 seconds again while in
Stop mode.
VCR LOCK OFF
• VCR Lock mode is cancelled automatically
after about 24 hours as long as the clock is set.
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
1 Press ACTION* to display the menu.
2 Press AT to select “SET UP
VCR,” and then press ► to
display the “SET UP VCR" screen.
MENU
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE: ENGL ISH
SELECT:* ▼ KEY
SET ; ► KEY
END :ACT ION KEY
3 Press AT to select “BEEPER,”
and then press ► to select “ON”
or “OFF.”
4 Press ACTION twice to exit this
screen.
f._I
REPEAT
PLAY : ON
: On
NOISY CH BLUE BACK: ON
SELECT;* ▼ KEY
, SET
: ► KEY
I END :ACT ION KEY
22