1L
0
Press POWER* on
the remote or unit.
08
ABe
Select a channel•
Using CH ,ILY or
NUMBERED
or keys.
3
24 IHIIIIIIlt ......................
Color and picture intensity levels are adjusted so the screen is
easier on your eyes during night time use.
1 Set NIGHT mode.
NIGHT
/
Press NITE.
NITE • NIGHT mode may be
selected when
watching
TV, playing a tape, or
while in FM mode.
To Cancel, press NITE,
• Previous settings are restored.
• NIGHT mode is canceled when
power is turned off or power
failure occurs.
• Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key, and then enter the
remaining two digits.
• Rapid Tune
Press R-TUNE to display the last channel you were watching.
• Audio Mute
Press MUTE to instantly mute the sound.
Press again, to restore the previous sound level.
• Phones
Connect an earphone (not supplied) or headphones (not
supplied) to the Phones Jack.
• SELF-DEMO Mode
With Power ON, hold down PLAY/REPEAT on the unitfor 5
seconds to display demo screen.
Repeat this to exit.
10
[_lPCheck list before you begin.
[] A_connections are made. (See page 7.)
[] Your unit is plugged in.
Model PV-C2060 unit is shown here.
PLAY/
REPEAT
1 2 PHONES
Jack
z1POWER
--MUTE
TUNE
)CH
VOL
MBERED
KEYS
_100 KEY
I . - .= - J_lliB_P_i|'J_;-_]
To Next Page
Loading...
