When the unit is turned on the first time, setup
mode isentered automatically.
[ Press POWER* on
O the remote or unit.
I SELECTLANGUAGE
PUSH CH• :English
OPRFMIR CH • :Espahol
APP. VOL + :Fran£ais
Select the language.
(_--- for English
(_- -for Spanish
(EspaSol)
(_ --for French
(Fran_ais)
• If wrong language is set, complete "Reset all unit Memory
Functions" steps page 48.
• If you use a cable box, it must be left on.
31 ] StartChannelAutoSet
CHANNEL/CL0CKAUTOSET andCIockAutoSet.
_g_,_N_OUTUTS_ _ouC_BLE Press CH A.
CH AUTO SET PROCEEDING J
Process of Setup
POWER1 - ,,,_, _.,
Ir ÷o _2CHANNEL
• UP
3
"2VOLUME
UP
AUTO CLOCK SET
PROCEEDING
Case 1/ (Setup completed
6/7/2000WED12:COPM
DST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
Press CH • to exit.
• If your area observes
daylight saving time,
but you would like to
turn the DST feature
off, complete the
"To Set or Reset the
Clock" step on page
46 and set DST : OFF.
• If your area observes daylight saving
time and DST is set to ON, but the
time is incorrect; complete the Time
Zone Adjust steps on the next page.
(Setup incomplete)
AUTO CLOCK SET
IS INCOMPLETE
:'USH ACT I ON TO SET CLOCK
See Case 2
nextpage.
IMPORTANTNOTE FOR AUTO CLOCKSET
• Auto clock set is performed the first time when the unit is turned off each day, If used, a cable box must be left on and
tuned to the PBS channel at the time the unit power is turned off if you want auto clock set to be done.
• If using a DSS receiver, it must be turned off for auto clock set.
• If a Cable Box or DSS receiver is connected to the unit via AudioNideo Jacks, an RF coaxial cable must also be
connected for auto clock set and channel auto set features.
• If for any reason the time is changed manually, automatic time correction will not occur.
To Next Page
Loading...
