Panasonic Omnivision PV-M1339 User Manual

Playback a Tape
Model PV-M2039 unit is shown here.
You can operate on the Combination
VCR (Model PV-M2039 unit is shown here.)
1 Insert a cassette.
2 Press PLAY.
M check list before you begin.
C All connections are made (see page 5.)
C] Your Combination VCR is plugged in.
Insert a cassette.
* Combination VCR power
comes on automatically.
To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels. x
"a FK a Press PLAY. PLAY.
* Playback begins if cassette
has no record tab.
B To Find a Particular Scene
Forward Search > Press FF
Reverse Search > Press REW
E For view Slow Motion >
Press SLOW (To release, press SLOW)
@ For view Still (Freeze) picture >
Press PAUSE (To release, press PAUSE)
E For view Frame by Frame picture >
Press SLOW in the Still mode
(To release, press PAUSE)
After Combination VCR is in Still or Slow mode for 3 minutes, it
will switch to Stop mode automatically to protect the tape and
the video head.
E To stop > Press STOP
E To rewind tape > Press REW in stop mode
E To eject tape > Press STOP/EJECT on the
Combination VCR
Features for Quality Picture
Digital Auto Tracking
Continuously analyzes the signal and adjusts for.
optimum picture quality.
Manual Tracking Control (to reduce picture nois
Use during Playback and Slow Motion mode to reduce
picture noise.
Press the 3 or 6 NUMBERED key on the remote control
or CHAY on the Combination VCR until the picture
clears up.
To return to Auto Tracking, press POWER off, then on
again a few seconds later.
PanaBlack™ Tube «For Model PV-M2039 only»
This Combination VCR uses a PanaBlack™ tube for
better color reproduction and picture contrast.
1 0 For assistance, call 1-800-211-PANA(7262)

Panasonic Omnivision PV-M1339 Specifications

General

Brand	Panasonic
Model	Omnivision PV-M1339
Category	VCR
Language	English