Panasonic Omnivision PV-M1339 User Manual

TV Operation
Press POWER on the
Combination VCR. M check list before you begin.
O All connections are made (see page 5.)
(Y Your Combination VCR is plugged in.
08 Select a channel.
ABC
UNAS =M or Model PV-M2039 unit is shown here.
keys.
Adjust volume.
Press VOL+—. PLAY/
d [> REPEAT
24 It
1 2 PHONES
Jack
NITE Mode
Color and picture intensity levels are adjusted so the screen is
easier on your eyes during night time use.
NITE Set NITE mode.
O NITE | Press NITE.
* NITE mode may be selected
when watching TV or playing
a tape.
To Cancel, press NITE.
* Previous settings are restored.
* NITE mode is cancelled when power is S,
turned off or power failure occurs.
B Using the 100 ke
nen iie CABLE channels 100 to 125 with the NUMBERED
NUMBERED keys, first press the 100 key, and then enter the Keys
remaining two digits. 100
KEY | C
m Rapid Tune
Press R-TUNE to display the last channel you were watching.
B Audio Mute
Press MUTE to instantly mute the sound.
Press again, to restore the previous sound level.
m Phones
Connect an earphone (not supplied) or headphones (not
supplied) to the Phones Jack.
BH SELF-DEMO Mode
With Power ON, hold down PLAY/REPEAT on the
Combination VCR for 5 seconds to display demo screen.
Repeat this to exit.
8 For assistance, call 1-800-211-PANA(7262)

Panasonic Omnivision PV-M1339 Specifications

General

Brand	Panasonic
Model	Omnivision PV-M1339
Category	VCR
Language	English