Panasonic Omnivision PV-M1339 User Manual

Timer Recording
You can set up to 8 programs to be recorded while you are away.
Display SET PROGRAM.
Press PROG.
* ifa program is already in memory,
press AY, and P to select an
unused program number.
stant sro cm] Set the recording DATE.
2 1) Press AY" to
select.
2) Press > or 4
to set.
* 1-31 = One time
* DAILY = MON-FRI
e WEEKLY SUN-SAT
z Same time once a
week
SELECT START DATE
SELECT:A Y KEY
SET :> KEY
END :PROG/ACTION KEY
Example A 172776
Today's — 7 SELECTA / V Selection Order DAILY
Date | weg v ber „WEEKLY __ WEEKLY
(SAT) (MON) {SUN)
Repeat step 2 to set:
* start time, stop time
* Channel (or LINE for outside source)
* Category [N/A (not applicable), SPORTS,
MOVIE, COMEDY, MUSIC, DRAMA]
* Speed (SP, LP, SLP)
DATE stant stop cu) Make the notes.
ARN PMI MISI + If not wanted, go to step 4.
TODAY
CATEGORY : MOVIE
E: 1) Press A to
begin.
2) Press AY to
select.
3)Press P or 4
to set.
4) Press PROG
(or ACTION) to
end.
WISH TO MAKE NOTES: KEY
:4 > KEY
ET i"
END :PROG/ACTION KEY
* Characters will change in the following order.
A—B-C---- Z-- BLANK— ——&
RR 9 ate 2 = 1 i 0 —/ — | GANE
Notes, Continued on the next page.
* If "PLEASE PREPARE FOR TIMER REC” appears and/or the
PROGRAM TIMER indicator flashes, check that a cassette with
record tab is loaded and the Combination VCR is in Stop mode.
* |f the start times of two programs overlap, the lower numbered
program will have priority.
* If the start time for a Timer Recording comes up during a normal
recording or One Touch Recording (page 11), the Timer Recording
will not be performed.
* If there is a power interruption of more than one minute, the
recording may not be performed or continue.
* If “INCOMPLETE” appears after all items have been set, check all
entries and make necessary corrections.
M check list before you begin.
O All connections are made (see page 5.)
C] Your Combination VCR is plugged in.
[ ] The clock is set to correct time.
L] The tape is long enough.
C The record tab is in place.
2 SELECT/
SET
À :CH UP
Y :CH DOWN
> :VOL UP
*«:VOL DOWN
Timer Recording Using
Combination VCR Buttons
You can set the Timer Recording using
ACTION key on the Combination VCR.
(See page 7.)
CH STOP/EJECT REW/S«.
Sola
+= ACTION —
1 Press STOP/EJECT and REW
together without a tape to display
MAIN MENU.
2 Press AV «b to select “VCR”
and STOP/EJECT and REW
together to display SET UP VCR
screen.
3 Press AY to select “TIMER
PROGRAM" and P to display the
TIMER PROGRAM screen.
& Repeat steps 2-5.
12 For assistance, call 1-800-211-PANA(7262)

Panasonic Omnivision PV-M1339 Specifications

General

Brand	Panasonic
Model	Omnivision PV-M1339
Category	VCR
Language	English