Panasonic Omnivision PV-V4611 User Manual

“Important: lí a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
Weak Signal Display ON/OFF Feature
When “ON,” picture is displayed regardless of signal
strength.
SELECT/SET
A PLAY exit ACTION, f
Y :STOP
f 2.0 Press 4»
` to select and display
UTO EET 7
ACTION pa Puss CH SET UP | CHANNEL,
SELECT:a Y SET:» press Av
COUNTER EAT ACTION to select WEAK
Press ACTION
to display menu,
RESET SIGNAL DISPLAY,
TAPE and press P to set
POSITION ON or OFF.
DISPLAY * ON: Picture is displayed regardless of signal
condition, and may not always be clearly
visible.
CM/ZERO OFF: Screen tums solid blue when signal is weak
or non-existant.
¢ Selecting ON has no effect on connected
equipment with blue back feature.
Press ACTION
to return to normal screen.
VCR Lock Feature Auto Shut-Off Feature |
When set to ON, all operations except When set to ON, VCR shuts off if blank tape is AS e
for timer record and tape eject are played or no signal is detected for 5 min. o <
prohibited. Useful for households with CTION = Y
small children. Press A ys
to display menu, * o
To turn on, O
hold down REC on 5 @
VCR LOCK ACTIVATED the VCR in Stop K REL m Press AV o
mode ht pe tape rewore wanna oe |! to select AUTO SHUT-
(Please noah MERS OUTPUT cH 3 OFF and press >»
NO CASSETTE ee as ai to set ON or OFF.
warning.)
EXIT
¡ACTION
i
To turn off,
ida repeat. above. Press ACTION
to return to normal screen.
e VCR Lock cancels in 24 hours if
clock is set.
27

Panasonic Omnivision PV-V4611 Specifications

General

Brand	Panasonic
Model	Omnivision PV-V4611
Category	VCR
Language	English