Panasonic Omnivision PV-V4611 User Manual

MTS Broadcast/VHS Hi-Fi Stereo System
Connection
Make the Audio/Video Connection as shown
on the previous page.
+ You can use a TV connected to Stereo amp
and speakers instead of a Stereo TV.
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen displays.
The signal being received is indicated with an "((*” mark while the selected
audio mode is indicated with an arrow.
To display the broadcast signal being received,
-> press DISPLAY.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main
language) and Secondary Audio Program (sub
language) broadcasts are being received STOP 12:00AM ABC
o
i i 0:00:00
simultaneously. Select STEREO or SAP audio A TENEO p
mode. SAP
MTS Stereo broadcast
Multi-channel Television Sound Stereo
STOP 12:00AM
0
@STEREO «
@SAP
broadcast. Select STEREO audio mode. STOP 12:00AM OO
* If stereo broadcast is weak and display STEREO Sp
ftickers, select MONO audio mode for ONO 4
Equipped with dbx®-TV Noise
Reduction for true MTS
reproduction. dbx®-TV Noise
Reduction is required for good
stereo separation and audio
fidelity. dbx” is a registered
trademark, and is licensed by
dbx* Technology Licensing.
possibly better results.
SAP broadcast
Secondary
Audio
Program
(sub
l
e
1S
DOA
ES
language}
broadcast.
Select
SAP
audio
0:00:00
mode
for
the
sub
language.
Há
SP
MONO broadcast
Normal monaural sound broadcast.
Audio Mode for Recording Audio Mode for Playback
Press SAP/ Hi-Fi Start playback.
to display audio mode. See page 14.
Display disappears after 5 seconds.
(Display Pe ) Press SAP/ Hi-Fi
to display audio mode.
, (Display disappears after 5 seconds.)
Press SAP/ Hi-Fi
repeatedly to select
desired mode.
O
5
D
=
Ñ
=
O
3
DƏJULADY
Press SAP/ Hi-Fi
repeatedly to select
desired mode.
w| N| —
* Refer to “Receivable
+ Arrow indicates ze
selection. Broadcast Types” above. HIFI (LS * Select “HIFI(L/R)’ or
HIFS (Aj
NORMAL
HIFé (LIA) A
“HIFKL)” or “HIFKA)" to
listen to stereo
recordings in stereo
sound, Select “NORMAL”
» Arrowindicates for monaural sound.
[Notes ) selection.
* Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes will
playback in monaural sound.
¢ To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV or an
extemal stereo amp and speakers. (See top of this page.)
+ If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
» Hi-Fi and normal audio playback volume level may differ. 23
Do a recording.
See page 15.

Panasonic Omnivision PV-V4611 Specifications

General

Brand	Panasonic
Model	Omnivision PV-V4611
Category	VCR
Language	English