Equipped with dbz ® -TV Noise
Reduction for true MTS
reproduction, el6x® -TV Noise
Reduction is required for good
stereo separation and audio fidelity.
d6x ® is a registered trademark, and
is licensed by dl_x® Technology
Licensing.
J
POWER--
MUTE_
VOL
UP/DOWN-
100 KEY-
NITE-
AUDIO-
e
C_) QD CD_
(i) (_D QD_.
Q:) QD (£)
RAPID
F-TUNE
CH
>UP/DOWN
'qUMBER
Keys
_ISPLAY
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an " _," mark while the selected audio mode is indicated
with an arrow. To change the audio mode for these
broadcasts, see the "Select Audio Mode for TV Viewing"
section (below.)
Press DISPLAY to display
the broadcast sk inal being received.
STOP 12:0SAM AI3C
o:oo oo
EO*" SP
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcastsare
being received simultaneously.
Select the STEREO or SAP audio mode.
I STOP 12 :OOAM ABC 1
0:00:00
Ik_o_EO *- SP
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the
display flickers, select MONO audio
mode for possibly better results.
A°/
STOP 12:00AM 0:00:
STEREO
I_SAP
MONO
SAP broadcast
Secondary Audio Program
(sub language).
Select SAP audio mode for the sub
language.
A°1
STOP 12:00AM 0;00:
STEREO
SAp
MONO broadcast
Normal monaural sound broadcast.
IMPORTANT NOTE:
<Model PV-C2061 only>
This stereo system is designed for
TV viewing only. Recording and
playback will always be in monaural.
< Example >
' I
Press AUDIO
Press AUDIO to select the desired audio mode
as described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown
below.
• "SAP" is selected with first press of AUDIO.
STOP t 2:00AM ABC
0:00:00
JSTEREO SP I [
SAP _* STOP 12:00AM ABC
MONO O:O0:O0
PSTEREO SP
LpressAUDIO.-I=_
Lpress AUDIO-I_-[
STOP 12:00A_ ABC /
O:O0:O0
I=STEREO _* SP
SAP
MO_O
17
To Next Page
Loading...
