[_Check list before you begin.
[] All connections are made, (See page 7.)
[] Your unit is plugged in.
[] Cassette with record tab in place.
1
I -n
m
Record tab
Insert a cassette.
• The unit power comes on
automatically.
Select Channel.
Press CH AV, or
NUMBERED keys.
• To select "LINE," see bottom
of this page.
SELECT/SET
A:CH UP
v:CH DOWN
k:VOL UP
4:VOL DOWN
ACTION--
3
oooo 4[
DISPLAYs.
STOP_
PAUSE/SLOW_-.
3SPEED- _'
Method 1:
Press CH At. The display will change as
follows. ._-bl -,_.._2-,,-_3,
[_'--_.II1_ (CABLE) (TV) _)
LINE4_125 or 69_-,--_
Method 2:
a Press ACTION for MAIN MENU.
b Press AV< • to select "TV', then press
ACTION for SET UP TV screen.
c Press AY to select "INPUT SELECT," and
then press • to select "TUNER" or "LINE."
d Press ACTION twice to exit this mode.
SPEED
0
Select Recording
speed (see page 6.)
Press SPEED.
SP = Standard Play
LP = Long Play
SLP = Super Long Play
• Selected speed is displayed.
Start Recording.
REC
Press REG.
• To edit out unwanted portions,
press PAUSE/SLOW to pause
and resume recording.
• You can view anotherchannel
during recording.
• Recording can only be started
with the Main Picture.
• To stop -) Press STOP
• One Touch Recording (OTR)
Press REC repeatedly _4:Normal Rec'--_0:30---_l:0_
to set the recording .00,4--3:00_2:004--1:30
length (30 min - 4 hours.)
• The unit stops recording at a preset time.
• PROG TIMER indicator lights on the unit.
• After the unit has been in Rec Pause mode for 5 minutes, it
will stop automatically to protect the tape and video head.
• The remaining recording time of an OTR can be displayed by
pressing DISPLAY.
• If you select a channel and "RECORDING PLEASE TURN
OFF PIP" appears, turn PIP off and try again.
• If PAUSE is pressed in PIP mode, "REC CH-- PLEASE
SWITCH TO RECORDING OH" is displayed. In this case
select recording channel and try again.
You can operate on the unit
1Insert a cassette. 2 4
i
i
• Press to stop. REC Indicator
15
To Next Page
Loading...
