You can set up to 8 programs to be recorded while you are away.
SET PROGRAM
SI_LECT:& • KEY
:_ KEY
ENO :PROG KEY
Display SET PROGRAM
screen.
Press PROG/VCR+*.
Select TIMER PROGRAMMING.
1) Press Ay
to select.
2) Press • to
display.
• If a program is already in memory,
press AV, and • to select an
unused program number.
3
STOP Set the recording DATE.
1) Press •V
to select.2) Press • or <1
to set.
• 1-31 = One time
• DAILY = MON~FRI
• WEEKLY SUN-SAT
t_8--9 ........ 31-- 1 --2"----6"_ = Same time once a
week
/
/
Today's -- 7 SELECTA I • Selection Order 0ALLY
Date !_WEEKLY...WEEKLY WEEKLY.__
-- (SAT "" MON] SUN
Repeat step 3 to set:
• start time, stop time
• Channel (or LINE for outside source)
• Category [N/A (not applicable),
SPORTS, MOVIE, COMEDY,
MUSIC, DRAMA]
• Speed (SP, LP, SLP)
•
TOOAY SA_p
CATEGORY : MOV I E
NISH TO MAKE NOTES:& KEY
SET ;4 _ KEY
END :pROGIACTION KEY
• Characters will change
in the following order.
Make the notes.
'If not wanted go to step 5,)
@
/
_--*A-- B-- C ...... Z-- BLANK-- ----&*_
• 9 ...... 2--1 -- 0--/--! _--
1) Press • to
begin.
2) Press •V to
select.
3) Press • or _1
to set,
4) Press
PROG/VCR+
(or ACTION)
to end.
Continued on the next page.
• 2 minutes before Timer recording is performed, "PLEASE PREPARE FOR
TIMER REC" appears and/or the PROG TIMER indicator flashes• Be sure
a cassette with record tab is loaded and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered program
will have priority.
• If the start time for a Timer Recording comes up during a normal recording
or One Touch Recording (page 15), the Timer Recording will not be
performed.
• If there is a power interruption of more than one minute, the recording
may not be performed or continued.
• If "INCOMPLETE" appears after all items have been set, check all entries
and make necessary corrections.
16
[_lPcheck list before you begin.
[] All Connections are made. {See page 7.)
[] Your unit is plugged in.
[] The clock is set to correct time.
[] The tape is long enough.
[] The record tab is in place.
SELECT/
SET
z3 A:CH UP
_Y:CH DOWN
I, :VOL UP
4 :VOL DOWN
-1PROGNCR+
6
__ Timer Recording Using __
unit Buttons
You can set e Timer Recording using
ACTION key on the unit. (See page 9.)
} 6ooc;.oo--0,-,-
EELS3
.-- ACTION --.
_] Press STOP/EJECT and REW
together without a tape inserted
to display MAIN MENU.
Press &Y + - to select "VCR"
and STOP/EJECT and REW
together to display SET UP
VCR screen.
Press A_, to select "TIMER
PROGRAM" and + to display the
TIMER PROGRAM screen.
_.,_Repeat main steps 3 ~ 6.
To Next Page
Loading...
