Load Detector
24
Remove the Battery Compartment lid
and insert the AA size battery.
• Make sure polarities are aligned property
• When tape loading and unloading time
becomes longer than normal, battery replace-
ment is necessary.
Turn the Tape Whee! on the _r_
cassette in the direction of the
arrow to reduce any slack,
Slide the RELEASE button in the
direction of the arrow to open the
PlayPak door.
nsert the _sr_ cassette with the
window facing up and to the left.
Then, snap the lid shut,
• Letthe Lead Detecter tullyretractbetore
using the PlayPak in your standardVHS
VCR.
•Be surethe cassette reel area under the
PtayPak isfree to turn while loading.
Slide the RELEASE button and wait
for the lid to open.
Hold the PlayPak securely in one
hand, Put your finger through the hole
in the bottom of !he PtayPak and push
the cassette out.
To Next Page
Loading...
