39
VCR
Back of TV
Audio In S-Video In
Back of TV
Audio In Video In
Special Effect Features
To S-Video In
To Audio In
S-VIDEO OUT
AV Cable
(Supplied)
S-Video Cable
(Not supplied)
To Video In
To Audio In
A/V OUT
For best Chrominance and Luminance, use
the S-Video connection if available on your
TV.
A/V Cable
(Supplied)
[ TV with S-VIDEO IN Jacks ]
1Set POWER to CAMERA or VCR.
To view what the Palmcorder is
recording or to playback a tape on your
TV.
2Turn your TV ON and set it to LINE
INPUT or S-VIDEO.
Check your TV operating instructions
for further information.
3Start playback or begin a recording.
• Make sure the Palmcorder and TV are
turned off while connecting.
• Please connect the A/V Cable securely.
A/V OUT
(Optional Remote Control Only)
You can display the various EVF and LCD
indications on your TV by pressing
DISPLAY ON TV on the remote control.
Press again to remove the indications.
Note
[ TV with AUDIO/VIDEO IN Jacks ]
View Recording/Playback on
your TV
Before you begin
• When using S-VIDEO Connector,
insert the DC Cable into the DC IN
Terminal. (p. 16)
DC Cable (Supplied)
DISPLAY
ON TV
Optional
DV203.p 36-39.p65 03/01/20, 14:5639
To Next Page
Loading...
