44
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Digital Features
3, 4
JOG KEY
1POWER
Picture in Picture (PinP)
You can display a PinP (still image) screen
on the Main Picture.
• PinP position is fixed at the bottom right of
the screen.
Note
1 Set POWER to CAMERA.
2 Press MENU to display the CAMERA
FUNCTIONS menu screen.
3 Rotate JOG KEY repeatedly to select
DIGITAL EFFECT , then press JOG
KEY to display the DIGITAL EFFECT
menu screen.
4 Press JOG KEY to select P-IN-P .
• Press MENU to exit this menu.
•“P-IN-P” will appear in the EVF or the
LCD monitor.
5 Aim at the scene you wish to place as
PinP, then press (CAMERA STILL)
to freeze the image.
6 Press (CAMERA STILL) again to
place the frozen image as PinP.
7 Press REC/PAUSE to record a scene
with PinP image.
• Press PHOTOSHOT to record a
scene with PinP image in PhotoShot
mode.
• Press (CAMERA STILL) again to
remove PinP image.
Main Picture
Picture in Picture
(PinP still image)
5, 6, 7
CAMERA
STILL
PHOTOSHOT
7REC/
PAUSE
2MENU
DV203.p 40-44.p65 03/01/20, 14:5644
To Next Page
Loading...
