38
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Strobe Multi Mode
• A Multi Image Playback screen cannot be
output from the DV terminal or USB
terminal.
• A Multi screen will have slightly lower
image quality.
Note
In Strobe Multi Mode, you can select the
rate at which a succession of still screens
are captured from the playback picture.
3, 4, 5
JOG KEY
1POWER
6PLAY
6MULTI
Special Effect Features
2MENU
1Set POWER to VCR.
2Press MENU to display the VCR
FUNCTIONS menu screen.
3Rotate JOG KEY to select
PLAYBACK FUNCTIONS , then press
JOG KEY to display the PLAYBACK
FUNCTIONS menu screen.
4Rotate JOG KEY to select
MULTI SPEED in the PLAYBACK
FUNCTIONS menu screen.
(Menu OSD: p. 110)
5Press JOG KEY repeatedly to set
desired speed.
• Press MENU to exit.
6Press (PLAY) to start playback.
Press (MULTI) at the point you want
to start capturing.
• A succession of 9 screens will be
captured, and playback will stop.
• Press
(PLAY) to start playback.
Press (STOP) to stop playback.
Strobe Speeds
Strobe Speeds
FAST
NORMAL
SLOW
9 screen capture time
Every 0.3 seconds
Every 0.6 seconds
Every 1.0 seconds
EVF/LCD
DV203.p 36-39.p65 03/01/20, 14:5538
To Next Page
Loading...
