Panasonic Palmcorder MultiCam PV-DV702 - Progressive Photoshot Mode; Digital Photoshot Mode

20
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Camera Recording
1 Set POWER to CAMERA.
2 Press MENU to display the CAMERA
mode menu screen.
3 Rotate JOG KEY to select
D.FUNCTION , and press JOG KEY
to display the CAMERA FUNCTION
menu screen.
4 Rotate JOG KEY to select
PROGRESSIVE , and press JOG
KEY to select ON or OFF.
• Press MENU twice to exit.
•“P” will appear in the EVF or the
LCD monitor.
5 Press PHOTOSHOT in Record/Pause
mode.
Use this feature to record a seven second
(approx.) still image on the tape from the
current camera picture. Audio is also
recorded for on-the-spot narration. Or, you
can add narration later with the Audio
Dubbing feature to make an interesting slide
show, etc. (p. 44)
1Set POWER to CAMERA.
2Press PHOTOSHOT in Record/Pause
mode. “PHOTO” will appear in the
EVF or the LCD monitor.
• If SHUTTER on the menu screen is set to
ON, a sound effect similar to the shutter
of a film camera will be heard when
PHOTOSHOT is pressed.
• When PHOTOSHOT is pressed, the
playback image takes approx. 7 seconds
to process. After that, the Camera mode
screen will be displayed.
Digital PhotoShot™ Mode
With the progressive PhotoShot Function,
you can record still pictures with higher
resolution than with the normal PhotoShot
Function.
Progressive PhotoShot™
Mode
• This function may not work with D.E.I.S.,
D.ZOOM and D.FUNCTION functions.
Note
Note
1POWER
1POWER
2MENU
3, 4
JOG KEY
5
PHOTOSHOT
EVF/LCD
EVF/LCD
2PHOTOSHOT
DV702.p 18-22.p65 02/03/29, 13:5620