32
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
R
1 Press PLAY for more than 5 seconds
in STOP mode.
• The Palmcorder will go into Repeat
Playback mode when the tape
reaches its end.
• The letter “R
” will appear in the
EVF and LCD monitor.
2 Turn the Palmcorder OFF to exit the
Repeat Playback mode.
1PLAY
EVF/LCD
Playback Your Recordings
Built-in
Speaker
1, 2
VOLUME
1 Set POWER to VCR.
2 Press MENU to display the VCR
FUNCTIONS menu screen.
3 Rotate JOG KEY to select
PLAYBACK FUNCTIONS,,then press
JOG KEY to display the PLAYBACK
FUNCTIONS menu screen.
4 Rotate JOG KEY to select BLANK
SEARCH in the PLAYBACK
FUNCTIONS menu.
(Menu OSD: p. 108)
5 Press JOG KEY to select ON.
• “BLANK” will appear on the screen.
3, 4, 5
JOG KEY
1POWER
Blank Search
You can go directly to a blank portion of
tape and start recording exactly where you
left off.
Repeat Playback
Adjusting the Volume
2MENU
1 Rotate VOLUME to adjust the volume
of the built-in speaker in PLAY mode.
• The volume setting screen appears.
2 Press “T” to increase the volume.
Press “W” to decrease the volume.
EVF/LCD
EVF/LCD
DV73.p 31-34.p65 2003/06/30, 17:0132
To Next Page
Loading...
