Panasonic Palmcorder MultiCam PV-GS32 - Still Playback;Still Advance Playback; Playing Back a Memory Card

33
Playback Mode
Still Playback/ Still Advance Playback
This Camcorder is capable of still picture playback and
frame-advance playback.
• Set to Tape Playback Mode.
• The One-Touch Navigation icon is displayed on the
lower right of the screen.
• The [ΙΙ►] or [◄ΙΙ] Indication appears.
• With each push of the [W] Button, still pictures
advance in the reverse direction.
With each push of the [T] Button, still pictures
advances in the forward direction. If you keep
pushing the Lever, still pictures advance
continuously.
• If the Camcorder is left in the Still Playback Mode
for more than 5 minutes, the Camcorder switches
to the Stop Mode to protect the video heads from
excessive wear and tear.
 To Resume Normal Playback
Move the Joystick Control [▲] to select [ ] again.
13
33
1 Move the Joystick Control [▲]
33
to start
playback.
2 Move the Joystick Control [▲]
33
again.
• The playback image stops in the Still Playback
Mode.
3 Push the [W/T] Lever
13
.
123-4567
12:34:56AM
JAN 2 2005 No.123456
Playing Back a Memory Card
It plays back files recorded on a Card.
1 Set the [OFF/ON] Switch
26
to [ON].
• The [POWER] Lamp
30
lights up.
2 Set the Mode Dial
32
to Picture Playback
Mode.
• The One-Touch Navigation icon is displayed on
the lower right of the screen.
3 Start Playback.
1
Folder File Number
2
Picture Size (p. 48)
3
File Number
1
2
3
32
26
30
Joystick Control [▲] : Starting the Slide Show
Stop the Slide Show
Joystick Control [▼] : Erase the pictures
Joystick Control [◄] : Playing back the previous
picture
Joystick Control [►] : Playing back the next picture
33
[One-Touch Navigation icon]
1 Push the [– / VOL +] Lever
13
to switch
the images.
To Select a Desired File and Playing
Back
13
Multiple files on the card (6 files on 1 screen) are
displayed.
Towards [+] : Full-screen display
(Displays 1 image.)
Towards [–] : Multi-screen display
(Displays 6 files on 1 screen.)
NO.5 100-0012
1
Picture Size
2
File Number
3
Folder File Number
2 Move the Joystick Control [▲, ▼, ◄, or ►]
33
to select a desired fi le.
1
2
3
33
• In the Multi-screen display,
- Move the Joystick Control [▲, ▼, ◄, or ►]
33
to
select a file (The selected file will be encircled by
a yellow frame) and press it. The selected file is
full-screen displayed.
- If there are 7 files or more, move the Joystick
Control. The next, or previous Multi-Screen will be
displayed.
• For other notes concerning this item, see page 53.