Panasonic Palmcorder PV-GS59 - If You no Longer Need Software or Driver (Uninstall); Transferring Motion DV Tape Pictures (Camcorder→Macintosh) Via DV Cable (Imovie; Imovie HD); For Macintosh

With a PC
67
Connecting the Camcorder to a
personal computer
2 Set [ BASIC] or [ ADVANCED] >> [
USB FUNCTION] >> [MOTION DV].
1 Set the Camcorder to Tape Recording
Mode or Tape Playback Mode.
4 To start Quick Movie Magic:
Select [Start] >> [All Programs (Programs)]
>> [Panasonic] >> [Quick Movie Magic
1.0E] >> [Quick Movie Magic].
To start MotionDV STUDIO:
Select [Start] >> [All Programs (Programs)]
>> [Panasonic] >> [MotionDV STUDIO 5.6E
LE for DV] >> [MotionDV STUDIO LE for
DV].
• Using the Quick Movie Magic or MotionDV
STUDIO for Windows, a variety of visual
effects can be added and titles can be created.
• You cannot record a video edited by the PC
onto the Tape in the Camcorder.
• It enters MotionDV STUDIO (Quick Movie
Magic) Mode.
3 Connect the Camcorder to your personal
computer with USB Cable.
2 Connect the Camcorder to the personal
computer with DV Cable.
3 Start Quick Movie Magic or MotionDV
STUDIO LE for DV.
• You can record the video edited by the PC
onto the Tape in the Camcorder.
• When 2 or more USB devices are connected to a
personal computer, or when devices are connected
through USB hubs or by using extension cables,
proper operation is not guaranteed.
• When connected to the keyboard USB terminal,
normal function may not be possible.
By connecting the Camcorder and Macintosh with
the DV Cable, you can transfer motion pictures
saved on a DV Tape directly to your Macintosh.
• iMovie HD, included with any new Macintosh or
sold with iLife.
Transferring Motion DV Tape
Pictures (Camcorder→Macintosh)
via DV Cable (iMovie / iMovie HD)
 For Macintosh
OS:
Mac OS X v 10.3 – X v 10.4
1 Set the Camcorder to Tape Playback
Mode.
If you no longer need software or
driver (Uninstall)
The screens may vary with the type of the OS.
1 Select [Start] (>> [Settings]) >> [Control
Panel], select the software or the driver
from [Add/Remove Programs] to uninstall.
• Uninstalling steps may vary depending on the
OS. Please refer to the user manual of your
OS.
2 After software or driver is uninstalled,
please restart your computer.
 For Windows
 With DV Cable (optional)
OS:
Windows 2000/XP
1 Set the Mode Dial to Tape Recording Mode
or Tape Playback Mode.