Panasonic PAW560MAH2L - Page 18

18
Product description
The light version, denominated by the letter “L” in the model name, contains the following
components:
● IP65 case
● Control unit including transformer
● Relays
● Terminal boards
● Remote controller (CZ-RTC2)
● PCBs for the expansion and RAP valves
● PCB for T10 connection (PAW-T10)
● Expansion valve (only for ECOi and ECO G)
● Refrigerant temperature sensors (E1, E2/E3)
● Air intake and air outlet temperature sensors (TA, BL)
In addition to this, the advanced version, without the letter “L” in the model name, contains also
the following components:
● Thermostat including an additional temperature sensor to be used either for
room supply air or ambient air temperature
● Interface for 0–10 V control (CZ-CAPBC2)
The heat exchanger, fan and fan motor must be eld supplied.
Control functions provided as standard by integral components
CZ-RTC2 Timer remote controller
● Operation-ON/OFF
● Mode selection
● Temperature setting
● Parameter settings
Additional Thermostat (advanced version only)
● Target temperature setting based on ambient temperature with proportional
integral logic*
● Demand control based on room supply air temperature to enhance comfort and
efciency*
* Only one of these two options can be chosen at a time.