Panasonic PAW560MAH2L

61
Control
7 Control
7.1 Remote controller
The standard Panasonic wired remote controller CZ-RTC2 is an integral part of the AHU Kit. All
control and setting operations for the ECOi, ECO G or PACi system can be performed on this
remote controller.
Important
The relevant control operations are described in the “Operating Instructions” manual for the
CZ-RTC2 remote controller. It is supplied with the AHU Kit or can be downloaded from the “Ser-
vice” section at www.panasonicproclub.com.
7.2 Thermostat
The advanced version of the AHU Kit features a thermostat (temperature controller), which can
optionally be set and parametrized separately if using the controller is required.
Important
The thermostat is not included in the „light“ version of the AHU Kit.
7.2.1 Control and display elements
1
2
3
45
6
7
8
1 Display “PV”: Process value
2 Display “SV”: Set value
3 Button “Down”
4 Button “Up”
5 Button “Set”
6 Button “Left”
7 LED “Alarm”
(ON when Auto-Tuning is active)
8 LED “Out”
(ON when Process Value is lower than Set Value)
i
i