28
Bluetooth
®
- General
DISPDISPDISPDISP
(Bluetooth
®
) indicator
lights when a Bluetooth
®
device is connected, and blinks during a call.
Registration
number
(M1 – M8)
Registration of a Bluetooth
®
device
to this unit
1
Press one of the preset buttons from
[1] through [6] to select a registration
number assigned to the Bluetooth
®
device to be registered.
Note: Up to 8 devices memory registered with
preset buttons.
[1] – [5] : Selects a registration number
(1st page: 1 – 5, 2nd page: 6 – 8)
[6] : Turns the registration pages
For registration No.6: press [6], then press [1].
For registration No.7: press [6], then press [2].
For registration No.8: press [6], then press [3].
2
Hold down the selected preset button
for more than 2 seconds.
3
Push [SEL] (Select) to make this unit
standby for registration with waiting
status.
Note: To exit waiting status, press [DISP].
4
Operate your Bluetooth
®
device to input
the PIN code for connection. (Default
PIN code is “0000”)
Once pairing/registration is successful, the
registered Bluetooth
®
device can automatically
communicate with this unit.
Notes:
¡ The text display of Bluetooth
®
device name and
telephone directory on this unit is only sup-
ported with English characters, other languages
and undisplayable characters/symbols will be
converted into an asterisk (
*
).
¡ If registration is not successfully completed within
1 minute, “TIME OUT” appears and the screen for
registration number selection resumes.
¡ If registration fails because of mismatched PIN
code, “B/T PIN ERR” appears and the screen for
registration number selection resumes.
¡ Depending on the communication status, it may
takes 5 to 40 seconds for device connection.
Note on operation:
Some Bluetooth
®
devices/Phones may not connect
to this unit or, even when connected, the operation
method, displays, and functions may differ from the
instructions within this manual.
For the Bluetooth
®
devices/Phones to be supported
with this unit, please visit/consult your dealer to
verify compatibility of your Bluetooth
®
devices or
phones.
Display change
Press [DISP] (Display) to change the
display.
Registered device
name (Example)
Clock
[DISP] (Display)
switches the
information on the
display.
[SRC]
selects a source.
[BAND]
connect, or discon-
nect a Bluetooth
®
device.
[PUSH SEL]
deletes the registration data.
makes this unit standby for
registration.
[1] through [6] (preset buttons)
selects a registration number of a
Bluetooth
®
device.
[6]: sets the PIN code.
[s]/[d]
selects a number.
(Signal) indicator
lights when a cellular phone is paired and connected,
indicates the intensity of cellular phone’s signal wave.
To Next Page
Loading...
