I Automatically changing screen size
If the received signal contains screen size specifications in RF, VIDEO INPUT (1-3) or
COMPONENT VIDEO INPUT (1-2), the screen size is automatically changed.
Press the ACTION button to display the MENU screen and select SET UP.
'1___._t Press to select
VIDEO.
Press to display
the VIDEO screen.
I
RECALL
Press to select
ID-1.
Press to set
"ON" or "OFF".
ON : When screen size specification
signals are detected, screen
size is automatically changed.
OFF : The screen size is not auto-
matically changed. (Turn OFF
if this function does not oper-
ate properly.)
Press to exit menu.
Notes:
• When ID-1 is detected and screen size is changed, Aspect mode will be displayed.
• When displaying split screen, ID-1 is not detected.
I Settingwhen480psignals(sequentialscan)areinputthr0ughCOMPONENTVIDEOINPUT
Adjust 480p signals to achieve a natural color from digital equipment connected to
COMPONENT VIDEO INPUT (Y, PB/Cb ,PR/Cr input terminals).
Press the ACTION button to display the MENU screen and select SET UP.
Press to select
VIDEO.
Press to display
the VIDEO screen.
I
Press to select
480P COLOR
MATRIX.
Press to set "SDTV"
or "HDTV".
SDTV : When the input signal is a normal
TV system (NTSC).
HDTV :When the input signal is a High-
Definition system (HD).
Press to exit menu.
Note:
480p COLOR MATRIX does not need to be set when using Hi-Definition equipment or
480i output equipment.
55
To Next Page
Loading...
