Panasonic PT-60LCX64-K - Page 70

REMOVAL OF THE COVER SWITCH C.B.A. FROM THE CABINET
1. Remove the Projection Unit. Refer to Steps 1~2 in "REMOVAL OF THE PROJECTION UNIT FROM THE CABINET."
2. 1) Remove the Front Cover Unit from the 8 latches.
2) Remove the Optical Cover by removing the 2 Screws (454).
3) Remove the Screw (401) from the front side.
Fig. D6-1
4) To remove the Cover Switch C.B.A., remove the Display Support Plate L with the Cover Switch C.B.A. by removing the 2
Screws (401).
5) Remove the Cover Switch C.B.A. by removing the Screw (402).
Fig. D6-2
Reassembly Note:
When installing the Display Support Plate L with the Cover Switch C.B.A., install it with the Lamp Cover removed.
401
454
454
Front Cover Unit
Optical Cover
latches
latches
Cover Switch
C.B.A.
Display Support
Plate L
401
402
Bosses
PT-60LCX64-K
70