Panasonic PT-60LCX64-K

To Next Page

To Previous Page

REMOVAL OF THE BALLAST HOLD PLATE, THE BALLAST SHIELD CASE TOP, THE

BALLAST SHIELD CASE BOTTOM

1. Remove the Ballast C.B.A. Refer to Steps 1~7 in "REMOVAL OF THE BALLAST C.B.A. AND THE TV/TUNER UNIT FROM THE

CABINET."

2. Remove the Ballast Hold Plate by removing the 2 Screws (452).

3. Release the Connector Cable P1301, P1302, and P1305 from the Clamper.

4. Remove the Ballast Shield Case Top.

5. Remove the Ballast Shield Case Bottom by removing the 2 Screws (411), and releasing the 3 Spacers.

Fig. D7

452

411

P1302

Ballast Shield Case Top

Ballast Hold Plate

Spacer

P1305

P1301

Ballast Shield

Case Bottom

PT-60LCX64-K

Panasonic PT-60LCX64-K - Page 71