EasyManua.ls Logo

Panasonic PT-CW331R

Panasonic PT-CW331R
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 W High-output Speaker Meet Your
Meeting/Seminar Room Needs.
The volume level of the 10 W high-output speaker is enough for meeting
rooms and classrooms; you do not need to use an external speaker. You can
make multi-media presentations.
The DLP
System Maintains Long-lasting,
Stable Performance.
In the DLP
system, the image quality does not
degrade with time due to long life of the device. You
can use the projector for various systems over a
long period without worry of quality loss. *
8
Supporting Various 3D Systems
[Viewing 3D images]
View 3D images at a distance at least three times further than the height of the
screen. Each person views and feels the 3D images differently. In some cases,
the effects may cause viewers to feel sick. If you see double 3D images or do
not see stereoscopic images, you may feel fatigue or discomfort If you feel sick,
immediately stop viewing 3D images. Children younger than fi ve or six years old
should not view 3D images.
DLP™ Link™
As synchronized signals are contained between the frames (images) for
the left and right eyes, you can build a 3D system without the need for the
optional emitter.
HDMI Input Terminal Supports 3D
The HDMI input terminal supports 3D. Connect a 3D Blu-ray player to the
projector to project Blu-ray 3D images.
3D-compatible Signal
Supports Frame Packing, Side-by-Side, Top-and-Bottom, and
Frame Sequential method.
“Crestron Connected™” Compatible
The wired LAN terminal supports Crestron’s application software, “Crestron
Connected
”, which can control various system devices by using a personal
computer connected to the network.
Audio Can Be Output in Standby Mode
Audio can be output from the audio output terminal in Standby mode*
11
. This
function is useful when the audio output terminal is connected to the external
audio system *
12
via the projector.
Ensuring a Long
Lamp Replacement Cycle
The lamp replacement cycle for the
PT-CW331R/CW330/CX301R/CX300 is 4,000
hours*
9
; and for the PT-CW241R/CW240 is
5,000 hours*
9
. Such long replacement cycles
reduce the hassle and the cost of maintenance,
while minimizing environmental impact.
Extensive Interfaces with an HDMI Input Terminal
Extensive interfaces, including two sets of computer (RGB) input terminals,
one set of computer (RGB) output terminals and an HDMI input terminal,
allows a wide range of system confi gurations.
1
9
2
10
3
11
4
12
5
13
6
14
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
8
Superb Performance
Confi guration: 3D Contents + Reproduction apparatus + 3D Glasses*
7
(DLP™ Link™ system)
0.5 W*
10
Standby Power Consumption
The standby power consumptions is as low as 0.5 W *
10
, reducing running
cost and effects on the environment.
3D Projection Ensuring powerful images
The projector delivers 3D images.You can enjoy powerful 3D images with
a reproduction apparatus and the 3D glasses*
7
. The combination of this
system with the short-throw function enables space-saving 3D projection,
helping you create innovative and attractive presentations.
* The left is an image only for
explanation.The screens
and photos illustrating the
functions look different from
the real things.
* Featured image: ET-LAC300
(Exclusively for the PT-CW331R/
CW330/CX301R/CX300)
3D Ready
The DLP™ System
Mini USB
HDMI IN
MONITOR OUT
COMPUTER IN 1
LAN
COMPUTER AUDIO IN 1
S-VIDEO IN
S-VIDEO AUDIO IN
SERIAL IN
COMPUTER IN 2
COMPUTER AUDIO IN 2
VIDEO IN
VIDEO AUDIO IN
AUDIO OUT
3

Related product manuals