16 – ENGLISH
# REMOTE1 lN/OUT terminal ........................(p. 18)
When two or more main units are used in the
system, they can be connected and controlled with
a wired remote control cable (M3 jack).
$ REMOTE2 IN terminal ..............................(
p. 106)
The user can remotely control the main unit by
using an external control circuit to this terminal
(D-SUB 9-pin female).
% SERIAL IN terminal ....... (pp. 25, 26, 79, 102-105)
This terminal is an RS-232C compliant input
terminal (switching necessary) to connect a PC
and to externally control the main unit (D-SUB
9-pin female).
& SERIAL IN terminal ....... (pp. 25, 26, 79, 102-105)
This terminal is an RS-422 compliant input terminal
(switching necessary) to connect a PC and to
externally control the main unit (D-SUB 9-pin
female).
( SERIAL OUT terminal ............... (pp. 26, 102-105)
This terminal is an RS-422 compliant output
terminal (switching necessary) to supply signals
given to the serial input terminal (D-SUB 9-pin
male).
)
LAN terminal (10BASE-T/100BASE-TX)
...................................................... (pp. 25, 26, 85)
This terminal is used for connecting a LAN cable.
* VIDEO IN terminal .......................................(
p. 25)
An input terminal for video signals. (BNC)
+ VIDEO OUT terminal ...................................(p. 25)
An output terminal (active through) for video
signals. (BNC)
- S-VIDEO IN terminal ...................................(
p. 25)
An input terminal for S-video signals (Mini DIN
4-pin). This terminal complies with S1 signals
and automatically toggles between 16:9 and 4:3
according to the size of input signals.
. RGB (YP
BPR) 1 IN terminal ................ (pp. 25, 26)
A terminal to input RGB or YPBPR signals (BNC).
/ RGB2 IN terminal ........................................(p. 26)
A terminal to input RGB or YPBPR signals (D-SUB
15-pin female).
0 DVI-D IN terminal ............................... (pp. 25, 26)
An input terminal for DVI-D signals.
Location and function of each part (continued)
Connection terminals■
#$ % & ()
*+ - . / 0
To Next Page
