Chapter 3āBasic Operations ā Projecting
60 - ENGLISH
6) Press the <SHIFT> button on the remote control or the <LENS> button on the control panel to display
the [SHIFT] adjustment menu, and reset the screen position of the projected image on the screen
surface back to an optimal state.
7) Perform focus adjustment again near the center of the screen and if it is still not enough, fine tune the
amount of rotation of the adjustment screws.
8) When adjustments have been made, securely tighten the loosened fixing screws.
9) Adjust the focus again using the remote control.
To Next Page
Loading...
