Need help?Do you have a question about the Panasonic PT-EX600U and is the answer not in the manual?
General| Matrix size | 0.8 \ |
|---|---|
| Projection distance | - m |
| Projection technology | LCD |
| Contrast ratio (typical) | 5000:1 |
| Screen size compatibility | 40 - 400 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, horizontal | ±40 ° |
| Power LED | Yes |
| RS-232 ports | 1 |
| Connectivity technology | Wired |
| Focus | Auto/Manual |
| Focal length range | 26.9 - 45.4 mm |
| Aperture range (F-F) | 1.7 - 2.3 |
| Lamp type | UHM |
| Lamp power | 330 W |
| Light source type | Lamp |
| Service life of light source | 3000 h |
| Service life of light source (economic mode) | 4000 h |
| Full HD | No |
| Analog signal format system | NTSC, NTSC 4.43, PAL 60, PAL M, PAL N, SECAM |
| RMS rated power | 10 W |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 0 |
| Component video (YPbPr/YCbCr) in | 3 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| HDCP | - |
| Noise level | 37 dB |
| Noise level (economic mode) | 31 dB |
| Product color | White |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 11 W |
| Power consumption (typical) | 490 W |
| Storage temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 434 mm |
|---|---|
| Width | 489.5 mm |
| Height | 164 mm |
| Weight | 10300 g |
Details on power supply, power consumption, and other main unit parameters.
Information about the LCD panel, lens, lamp, screen size, brightness, contrast, and resolution.
Details on HDMI, DVI-D, RGB, Component, and S-Video input ports.
Important safety precautions and guidelines for installing the projector.
Table detailing projection distances for 4:3 aspect ratio screens with various lenses.
Details supported signal formats, scanning frequencies, and dot clock rates.
List of commands for controlling projector functions like power, input, and lamp.
Precautions for projector placement, exhaust, and ventilation to prevent overheating.
To Next Page
