Need help?Do you have a question about the Panasonic PT-LB60U and is the answer not in the manual?
Covers power supply voltage/current limits, grounding plug safety, and warning symbols.
Describes lightning and exclamation point symbols used for safety warnings.
Details RF exposure limits and FCC rules compliance for the device.
Covers smoke, installation safety, foreign objects, water ingress, overload, and modification risks.
Guidelines for cleaning, preventing damage, and safely handling the power cord.
Precautions against water, soft materials, liquid containers, foreign objects, and thunderstorms.
Covers battery insertion, mixing, storage, and potential hazards.
Precautions regarding the lens, light beam, and air outlet ports.
Safety measures for lamp replacement and ensuring proper ventilation.
Safe practices for moving the projector, placing objects, and handling batteries.
Precautions for long-term use, cleaning, and handling a broken lamp.
Guidelines for safely moving and setting up the projector to prevent damage.
Explains front/rear, desk/ceiling projection setups for optimal placement.
Shows how to connect a PC for control and display via serial and RGB.
Illustrates connecting a DVD player via component video (YPBPR) signals.
Shows connections for DVD players, video decks, and audio systems.
Steps before powering on, including checking connections and connecting power cord.
Pressing the power button and turning on connected devices.
Selecting the signal source and using auto setup for RGB signals.
Adjusting angle, size, and focus for optimal projection.
Steps to turn off the projector using the power button and disconnecting power.
Automatic adjustment of image position and settings for RGB signals.
Steps to adjust PICTURE MODE and other picture-related settings.
Detailed adjustments for contrast, brightness, color, and tint parameters.
Diagnosing and resolving issues indicated by the TEMP light.
Diagnosing and resolving issues indicated by the LAMP light.
Safety, handling, and recommended replacement interval for the lamp.
Steps for disconnecting power, removing cover, and removing the lamp unit.
Steps for installing the new lamp and resetting lamp usage time.
Solutions for power, no picture, fuzzy, and color balance issues.
Solutions for incorrect signals, no computer image, and no sound.
To Next Page
General