Panasonic PT-LB90NT - Status Asking Commands and Parameter Format; Status Asking Commands; Parameter Format Definitions

S PEC F ILE
PT-LB90NT
Portable LCD Projector
As of August 2009 < 9 >
Parameter format
Parameter format Size (Byte) Definition
<pl>
<off on>
<input signal>
<installation>
<language>
<power condition>
<lamp condition>
<acctch>
<color temp>
<date>
<time>
3 (1 or 2 bytes also
possible when
under control)
1
3
1
3
3
1
4
1
8
6
Decimal without signs: 0 to 999 (000, 001, 002...999)
Decimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99)
Callback from the projector is 3 Byte.
0 = off, 1 = on
RG1 = computer 1, RG2 = computer 2, NWP = network,
VID = video, SVD = S-Video
0 = front, 1 = rear, 2 = ceiling and front, 3 = ceiling and rear
ENG = English, DEU = German, FRA = French, ESP = Spanish,
ITL = Italian, JPN = Japanese, CHI = Chinese, POR = Portuguese,
SVE = Swedish, NOR = Norwegian, DAN = Danish, POL = Polish,
CES = Czech, MAG = Hungarian, RUS = Russian, THA = Thai, K
OR = Korean
000 = power off (standby mode off), 001 = power on (standby mode on)
0 = standby, 1 = lamp on under control, 2 = lamp off,
3 = lamp off under control
Decimal without signs: 0000-9999 hours
0 = economy, 1 = normal, 2 = high
y1y2y3y4m1m2d1d2w = year (y) month (m) day (d) day of week (w)
Day of week: Monday = 1, Tuesday = 2, ... Sunday = 7
h1h2m1m2s1s2 = hour (h) minute (m) second (s)
Command example
To set the volume to +30, send the command as shown right.
STX AVL : 30 ETX
Start Command Parameter End
NOTE: If a wrong command is received, the projector will send an ER401 command to the computer.
NOTE: When sending commands without parameters, a colon (:) is not necessary.
Status asking commands
Command Description Callback
<Parameter>
QPW
Q$S
QIN
QAV
QVC
QVT
QVB
QVR
QVS
QWR
QWG
QWB
QHP
QVP
QCP
QDC
QSP
QLG
QXG
QVX:DLVI0
QPM
QFZ
Q$L
QSH
QKS
QTE
Standby power status
Lamp status
Input signal status
Volume adjustment value
Color adjustment value
Tint adjustent value
Brightness adjustment value
Contrast adjustment value
Sharpness adjustment value
White balance: R adjustment value
White balance: G adjustment value
White balance: B adjustment value
Horizontal position adjustment value
Vertical position adjustment value
Clock phase adjustment value
Dot clock adjustment value
Projection method status
On-screen menu language
Wide mode status
Daylight View status
Picture mode status
Freeze status
Lamp run time
Shutter function status
Keystone correction status
Color temperature adjustment status
Off
On
Auto
Off
Auto
On
Natural
Standard
Dynamic
Blackboard
Whiteboard
<power condition>
<lamp condition>
<input signal>
<pl>
<pl>
<pl>
<pl>
<pl>
<pl>
<pl>
<pl>
<pl>
<pl>
<pl>
<pl>
<pl>
<pl>
<pl>
<0>
<1>
<2>
<+00000>
<+00001>
<+00002>
<NAT>
<STD>
<DYN>
<BBD>
<WBD>
<off_on>
<acctch>
<off_on>
<pl>
<color temp>