EasyManua.ls Logo

Panasonic PT-LB75

Panasonic PT-LB75
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
< 1 >
S PEC F ILE
Product Number : PT-LB75
Product Name : LCD Projector
As of May 2008. Specifications subject to change without notice.

Other manuals for Panasonic PT-LB75

Question and Answer IconNeed help?

Do you have a question about the Panasonic PT-LB75 and is the answer not in the manual?

Panasonic PT-LB75 Specifications

General IconGeneral
Contrast Ratio500:1
TechnologyLCD
Resolution1024 x 768 (XGA)
Lamp Life5000 hours (Eco Mode)
Zoom Ratio1.2x

Summary

Projector Specifications

Optical System Details

Details about the projector's optical components including LCD panel size, drive method, and lens specifications.

Projector Terminals

Comprehensive list and description of all input and output connectors available on the projector.

Built-in Speakers

Information regarding the projector's integrated audio output capabilities.

Remote Control Unit and Accessories

Remote Control Unit Specifications

Details on the remote control's power, range, dimensions, and weight.

Supplied and Optional Accessories

List of items included with the projector and those available for separate purchase.

Installation and Setup Guidelines

Standard Setting-up Positions

Table showing projection distance and height from screen edge for various screen sizes.

Projection Distance Calculations

Formulas for calculating projection distance for different aspect ratios and screen sizes.

Installable Angle

Guidelines on the permissible vertical installation angles for the projector.

Computer Data Compatibility

List of Compatible Signals

Table detailing supported computer resolutions, scanning frequencies, and dot clock frequencies.

Serial Communication and Control

Serial Connector Pin Assignments

Details of the serial connector pinout and signal assignments for PC control.

Communication Conditions

Factory settings for serial communication, including synchronization and baud rate.

Control Command Structure

Basic format for sending commands, including STX, command, parameter, and ETX.

Projector Control Commands

Control Commands

List of commands for controlling projector functions like power, volume, and picture mode.

Status Asking Commands

Commands to query the projector's current status, such as lamp status and input signal.

Parameter Format and Examples

Parameter Format

Definitions and sizes for command parameters used in serial communication.

Command Example

Illustrative example of sending a command to set the projector's volume.

Notes on Projector Placement and Operation

Projector Placement Precautions

Safety guidelines for projector placement and ensuring adequate ventilation.

Operating the Projector Continuously

Impact of continuous and intermittent operation on lamp life duration.

Related product manuals