Panasonic PT-LZ370U

E c o l o g y - c o n s c i o u s D e s i g n
Panasonic works from every angle to minimize environmental impact in the
product design, production and delivery processes, and in the performance
of the product during its life cycle. The PT-LZ370 projector reflects the
following ecological considerations.
• No halogenated flame retardants are used in the cabinet.
• Non-coated cabinet for easy recycling.
• Lead-free solder is used to mount components to the printed circuit
boards.
• Lamp power switching further reduces power consumption.
• Standby power consumption of only 0.08 W.*
6
• “ECO” button on the remote control.
• An Auto Off Timer switches the projector to Standby mode when no input
signal is received for a preset time.
Waveform Monitor for Precise Calibration
When the output level of the source device fluctuates due to the perfor-
mance of the device or its cable connections, the original black and
white levels of the image
content cannot be repro-
duced. With the PT-LZ370,
you can view the wave-
forms on the screen and
adjust the settings either
automatically or manually
as you prefer.
DICOM Simulation Mode
*
1
This imaging mode is similar to DICOM Part 14, which is a medical
imaging standard. It reproduces X-ray images with remarkable clarity. It
also allows information to be shared by many viewers on a large screen,
such as during medical conferences or training courses.
Full 12-bit Digital Signal Processing Achieves Smooth,
Natural Gradation
The PT-LZ370 handles full 12-bit digital image processing. It faithfully
reproduces even subtle hues and brightness variations. The resulting
smooth gradation renders natural images with finely detailed nuances.
Installation and Operation Flexibility
2x Zoom Lens and Wide Horizontal/Vertical Lens Shift
The 2x zoom lens and horizontal/vertical lens shift let you accommodate
a wide range of room sizes and shapes. When lights or ventilation holes
are located in the ceiling mounting site, you can simply relocate the pro-
jector to avoid them. And when replacing existing projectors, this can
reduce costs by permitting the use of existing mounting positions and
cablings.
Abundant Connection Terminals, Including HDMI
Interfaces include two sets of HDMI input. The serial terminal (RS-232C)
has an Emulate function that lets you continue using existing control sys-
tems when replacing previous Panasonic models. It is also possible to
output audio during Standby mode.
*
2
This is convenient when connecting
an external audio system through the projector.
*
3
Easy Remote Monitoring and Control over a LAN
A web browser on a computer connected through a wired LAN system
lets you remotely operate projectors and check their status. An e-mail
messaging function can also notify you when a lamp needs replacement,
and indicate the overall projector status. In addition, Multi Projector Moni-
toring and Control Software is available for monitoring and controlling
multiple Panasonic projectors from a single PC. The wired LAN terminal
is compatible with PJLink
™
(class 1), an open protocol that is used by
many manufacturers, to enable integrated control of systems that contain
different brands of projectors.
Crestron RoomView
™
The LAN terminal allows a computer
connected to the network to use Crest-
ron RoomView
™
application software to
manage and control system devices.
Superb Basic Performance
Eco Management Functions
A number of functions are provided to reduce power consumption. They
adjust the brightness according to ambient light conditions, and reduce
the lamp power when there is no signal input or the projector is in AV
Mute mode. You can easily set the Eco Management functions according
to operating conditions by using the ECO button on the remote control.
Up to 3,000-Hour Lamp/Filter Replacement Cycle
*
4
*
5
and
Simple Maintenance
The lamp and air filter both have replacement
cycles of up to 3,000 hours. This reduces the
amount of bothersome maintenance necessary
over a long period of time, cuts maintenance
costs, and helps to lower the environmental
impact. For easy maintenance, you can replace
the filter from the side and the lamp from the
top of the projector. The filter and lamp are eas-
ily replaced even after the PT-LZ370 is installed
on the ceiling.
Seminar
room
Classroom
Auditorium
Lecture
room
*
1 This product is not a medical instrument. Do not use it for actual medical diagnosis.
*
2 Requires menu selection.
*
3 Audio monitoring requires external speakers and an audio amplifier
*
4 The usage environment affects the lamp replacement cycle.
*
5 The usage environment affects the duration of the filter.
*
6 When the standby mode is set to ECO, network functions such as power on over
the LAN will not operate. Also, only certain commands can be received for external
control using the serial terminal.