Panasonic PT-RW730

Chapter 2 Getting Started — Setting up
ENGLISH - 35
g Install the projector so that the front side of the projector is parallel to the screen.
g Install the projector so that the image can be projected within the range of shift adjustment by moving the lens position.
The 90° rotation of the image can be set in the [DISPLAY OPTION] menu → [IMAGE ROTATION].
f Do not use the projector and the high-powered laser equipment in the same room. The DLP chips can be damaged if a laser beam hits the
projection lens surface.
[GEOMETRY] projection range
[VERTICAL KEYSTONE] (viewed from the side) [HORIZONTAL KEYSTONE] (viewed from above)
Screen
Screen
Vertical arc correction (viewed from the side) Horizontal arc correction (viewed from above)
Screen
Projection distance
Arc radius
Screen
Projection distance
Arc radius
Arc center
Screen
Projection distance
Arc radius
Arc center
Screen
Projection distance
Arc radius