Panasonic PT-RW730 - Sub-Menu

Chapter 4 Settings — Menu navigation
76 - ENGLISH
Main menu item Page
[DISPLAY OPTION] 98
[PROJECTOR SETUP] 117
[P IN P] 139
[TEST PATTERN] 141
[SIGNAL LIST] 142
[SECURITY] 145
[NETWORK] 149
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
[PICTURE]
Sub-menu item Factory default Page
[PICTURE MODE] [GRAPHIC]
*1
79
[CONTRAST] [0] 79
[BRIGHTNESS] [0] 79
[COLOR] [0]
*2
80
[TINT] [0] 80
[COLOR TEMPERATURE] [DEFAULT]
*2
80
[WHITE GAIN] [+10] 82
[GAMMA] [DEFAULT] 82
[SYSTEM DAYLIGHT VIEW] [OFF]
*2
83
[SHARPNESS] [+6]
*2
83
[NOISE REDUCTION] [OFF]
*2
84
[DYNAMIC CONTRAST] [2]
*2
84
[SYSTEM SELECTOR] [YP
B
P
R
]
*1
85
*1 Depends on the signal input.
*2 Depends on the [PICTURE MODE].
[POSITION]
Sub-menu item Factory default Page
[SHIFT] ― 87
[ASPECT] [DEFAULT]
*1
87
[ZOOM] ― 88
[CLOCK PHASE] [0]
*1
89
[GEOMETRY] [OFF] 89
*1 Depends on the signal input.
[ADVANCED MENU]
Sub-menu item Factory default Page
[DIGITAL CINEMA REALITY] [AUTO]
*1
92
[BLANKING] ― 92
[INPUT RESOLUTION] ― 93
[CLAMP POSITION] [24]
*1
93
[EDGE BLENDING] [OFF] 93