To Next PageTo Next PageWhat to do if HDMI video is jumbled on Panasonic PT-RZ660?
If video from an HDMI compatible device doesn't appear or appears jumbled on your Panasonic Projector: * Ensure the HDMI cable is securely connected. * Try turning the power of both the projector and the external device off and on. * Verify that the input signal is compatible with the projector.
How to fix Panasonic Projector when power does not turn on?
If your Panasonic Projector isn't powering on, try these steps: * Ensure the power plug is firmly inserted into the outlet. * Check that the switch is not set to . * Verify the wall outlet is supplying electricity. * See if the circuit breakers have tripped. * Check if the light source indicators / are blinking. * Check if the temperature indicator is lit or blinking.
Why Panasonic PT-RZ660 Projector remote control does not respond?
If the remote control for your Panasonic Projector isn't responding, consider the following: 1. Check if the batteries are depleted and replace them if necessary. 2. Ensure the batteries are inserted with the correct polarity. 3. Make sure there are no obstructions between the remote control and the projector's signal receiver. 4. Verify the remote control is within its effective operating range. 5. Check if other light sources, like fluorescent lights, are interfering with the projection. 6. Confirm that the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] is not set to [DISABLE]. 7. Verify that the terminal is not being used for contact control. 8. Ensure the ID number setting operation is correct.
What to do if my Panasonic PT-RZ660 Projector has no image?
If no image appears on your Panasonic Projector, consider the following: * Check if the connections to external devices are correctly performed. * Ensure the input selection setting is correct. * Verify that the [BRIGHTNESS] adjustment is not at its minimum. * Confirm the external device connected to the projector is working properly. * Check if the shutter function is in use. * Make sure the lens cover is removed from the lens. If the power indicator is blinking in red, consult your dealer.
Why don't the buttons on my Panasonic Projector control panel operate?
If the buttons on the control panel of your Panasonic Projector are not working, check the following: * Ensure that the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] is not set to [DISABLE]. * Verify that the terminal is not being used for contact control.
What to do if menu screen does not appear on Panasonic PT-RZ660?
If the menu screen does not appear on your Panasonic Projector, check if the on-screen display function is turned off (hidden).
Why image output from DVI-D does not appear on Panasonic PT-RZ660?
If the image output from DVI?D of the computer does not appear on your Panasonic Projector, try the following: * Check if [EDID SELECT] in [DVI-D IN] is set to [EDID3] or [EDID2:PC]. * Consider updating the graphic accelerator driver of the computer to the latest version. * Performing the [EDID SELECT] setting in [DVI-D IN], and then rebooting the computer may also improve the image.
How to fix a fuzzy image on a Panasonic PT-RZ660 Projector?
If the image on your Panasonic Projector appears fuzzy, consider these solutions: * Ensure the lens focus is set correctly. * Verify that the projection distance is appropriate. * Check if the lens is dirty. * Confirm that the projector is installed perpendicular to the screen.
How to fix fuzzy image on Panasonic PT-RZ660?
If the image from your Panasonic Projector appears fuzzy, check these items: * Ensure the lens focus is set correctly. * Verify the projection distance is appropriate. * Check if the lens is dirty. * Confirm the projector is installed perpendicular to the screen.
What to do if DVI-D image from computer does not appear on Panasonic Projector?
If the image output from the DVI-D of your computer does not appear on the Panasonic Projector: * Verify that [EDID SELECT] in [DVI-D IN] is set to [EDID3] or [EDID2:PC]. * Updating the graphic accelerator driver of the computer to the latest version may improve the image. * Performing the [EDID SELECT] setting in [DVI-D IN] and then rebooting the computer may also help.
General| Resolution | 1920 x 1200 (WUXGA) |
|---|---|
| Light Source | Laser |
| Contrast Ratio | 20, 000:1 |
| Zoom Ratio | 1.6x |
| Connectivity | HDMI, DVI-D, LAN |
| Light Source Life | 20, 000 hours (Normal mode) |
| Keystone Correction | Vertical: ±30°, Horizontal: ±30° |
| Video Compatibility | HDTV |
| Input Terminals | HDMI x 2, DVI-D, 3G-SDI, VGA |
| Output Terminals | HDMI |
| Control Terminals | RS-232C, LAN |
| Noise Level | 35 dB (Normal mode) |
Covers installation modes, angle sensor, and projector placement for optimal projection.
Details on connecting external devices, networks, and specific terminals like HDMI, DVI-D, and DIGITAL LINK.
Step-by-step guide for connecting power, turning the projector on, and off, including power indicator status.
How to select input signals, adjust projected image appearance, and use basic projection functions.
A guide to diagnosing and resolving common problems encountered with the projector's operation.
