Panasonic PT-RZ790

Questions and Answers:

M
Michael McneilAug 18, 2025
Why is my Panasonic PT-RZ790 remote control not working?
- J
  James StewartAug 18, 2025
  If the remote control for your Panasonic Projector isn't responding, first ensure the batteries aren't depleted and are inserted with the correct polarity. Check for obstructions between the remote and the projector's signal receiver. Also, verify that you're within the remote's effective range and that other light sources aren't interfering with the signal. Finally, confirm that the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] isn't set to [DISABLE], the terminal isn't used for contact control, and the ID number setting is correct.
A
Austin McgeeAug 20, 2025
How to fix no image on Panasonic PT-RZ790 Projector?
- A
  amber03Aug 21, 2025
  If your Panasonic Projector displays no image, verify that all connections to external devices are correctly performed and that the input selection setting is correct. Ensure the [BRIGHTNESS] adjustment isn't at its minimum. Check that the connected external device is working properly and that the shutter function isn't in use. Confirm the projection lens is correctly attached and that the lens cover has been removed.
B
Bobby PattersonAug 23, 2025
What to do if my Panasonic PT-RZ790 Projector power does not turn on?
- E
  eellisAug 23, 2025
  If your Panasonic Projector's power won't turn on, ensure the power plug is firmly inserted into the outlet and the switch isn't set to . Verify the wall outlet is supplying electricity and that the circuit breakers haven't tripped. Check if the light source indicators / are blinking or if the temperature indicator is lit or blinking.
S
Steven DouglasAug 26, 2025
What to do if HDMI video is not displayed correctly on Panasonic PT-RZ790?
- Y
  yswansonAug 26, 2025
  If the video from an HDMI compatible device does not appear or appears jumbled on your Panasonic Projector, make sure the HDMI cable is connected securely. Try turning the power of both the projector and the external device off and on. Also, verify that the input signal is compatible with the projector.
E
erica36Aug 27, 2025
How to fix no image from DVI-D on Panasonic PT-RZ790?
- W
  Wendy GreenAug 28, 2025
  If the image from DVI-D of the computer does not appear on your Panasonic Projector, is [EDID SELECT] in [DVI-D IN] set to [EDID3] or [EDID2:PC]? Updating the graphic accelerator driver of the computer to the latest version or performing the [EDID SELECT] setting in [DVI-D IN] and then rebooting the computer may also help.
K
kelleydavidAug 30, 2025
What to do if DIGITAL LINK image is not displayed on Panasonic Projector?
- L
  laura26Aug 30, 2025
  If the DIGITAL LINK input image is not displayed on your Panasonic Projector, ensure the cable is compatible with the projector's condition. Verify the connections between the twisted-pair-cable transmitter and external device, and between the transmitter and projector, are correctly done. Check if [DIGITAL LINK MODE] is set to [AUTO], [DIGITAL LINK], or [LONG REACH], and not to [ETHERNET]. Also, ensure the input signal is compatible with the twisted-pair-cable transmitter.
G
gkeithSep 1, 2025
Why is the image on my Panasonic Projector fuzzy?
- K
  Kimberly LarsenSep 1, 2025
  If the image from your Panasonic Projector is fuzzy, make sure the lens focus is set correctly and the projection distance is appropriate. Check if the lens is dirty and ensure the projector is installed perpendicular to the screen.
J
Jeanette ThomasSep 3, 2025
Why is the image on my Panasonic Projector dark?
- P
  Pamela DuncanSep 3, 2025
  If the image on your Panasonic Projector is dark, check if the [CONTRAST] adjustment setting is at a minimum and if the setting value of [LIGHT OUTPUT] is set small. Also, see if the light source indicators / are blinking. Reattaching the projection lens may also improve the image.
J
Jill DouglasSep 6, 2025
Why does the Panasonic Projector image look pale?
- C
  coxmargaretSep 6, 2025
  If the color on your Panasonic Projector appears pale or grayish, ensure that the [COLOR] and [TINT] are adjusted correctly. Check if the external device connected to the projector is adjusted correctly, and inspect the computer cable for any damage.
M
Mrs. Katherine Barnes MDSep 8, 2025
How to troubleshoot Panasonic PT-RZ790 Projector image display issues?
- J
  Jesse EllisSep 8, 2025
  If the image on your Panasonic Projector does not display correctly, ensure that [SYSTEM SELECTOR] is set properly and that [RGB1 INPUT SETTING] is correct. Check for any problems with the video tape or other image sources, and verify that the input signal is compatible with the projector.

Panasonic PT-RZ790 Specifications

General

Contrast Ratio	20, 000:1
Light Source	Laser
Display Type	3LCD
Resolution	1920 x 1200
Connectivity	HDMI, DVI-D, USB
Lamp Life	20, 000 hours
Keystone Correction	Horizontal: ±30°
Video Modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Data Modes	WUXGA, WXGA, XGA, SVGA, VGA
Output Terminals	HDMI, DVI-D
Control Terminals	RS-232C, LAN, USB