To Next PageTo Next PageWhy Panasonic PT-RZ970 Projector power does not turn on?
First, ensure the power plug is firmly inserted into the outlet. Check if the switch is set to . Verify that the wall outlet is supplying electricity and that the circuit breakers haven't tripped. Also, check if the light source indicators / are blinking or if the temperature indicator is lit or blinking.
What to do if Panasonic Projector remote control does not respond?
If the remote control isn't working, check these possible causes: 1. Make sure the batteries aren't depleted and are inserted with the correct polarity. 2. Ensure there are no obstructions between the remote and the projector's signal receiver. 3. Verify the remote is within its effective range and that other light sources aren't interfering. 4. Check if the [REMOTE CONTROL] setting in [CONTROL DEVICE SETUP] is set to [DISABLE] or if the terminal is used for contact control. Also, ensure the ID number setting operation is correct.
Why no image appears on my Panasonic Projector?
If no image is appearing, verify that all connections to external devices are correctly made and that the input selection setting is correct. Ensure the [BRIGHTNESS] adjustment isn't at its minimum. Confirm the external device connected to the projector is working correctly and that the shutter function isn't in use. Also, check that the lens cover is removed. If the power indicator is blinking red, you should consult your dealer.
How to fix a fuzzy image on a Panasonic Projector?
To correct a fuzzy image, ensure the lens focus is set correctly and that the projection distance is appropriate. Also, check if the lens is dirty and ensure the projector is installed perpendicular to the screen.
What to do if image is dark on Panasonic PT-RZ970?
If the image is dark, check if the [CONTRAST] adjustment is at a minimum and if the [LIGHT OUTPUT] setting is set too low. Also, see if the light source indicators / are blinking. Reattaching the projection lens might also improve the image.
How to fix image does not display correctly on Panasonic PT-RZ970 Projector?
If the image isn't displaying correctly, ensure that the [SYSTEM SELECTOR] is set properly and that the [RGB1 INPUT SETTING] is also correct. Verify there are no issues with the video tape or other image sources. Also, confirm that the input signal is compatible with the projector.
What to do if Panasonic Projector menu screen does not appear?
If the menu screen doesn't appear, check if the on-screen display function is turned off (hidden).
Why buttons on the Panasonic PT-RZ970 Projector control panel do not operate?
If the buttons on the control panel aren't working, check if the [CONTROL PANEL] setting in [CONTROL DEVICE SETUP] is set to [DISABLE]. Also, verify if the terminal is being used for contact control.
How to fix image from a computer does not appear on Panasonic Projector?
If the image from a computer isn't appearing, check if the cable is too long (for D-Sub cables, it should be 10 m (32'10") or shorter). Also, ensure the external video output on the laptop is set correctly, which may involve pressing keys like “Fn” + “F3” or “Fn” + “F10” simultaneously, depending on the computer model. Refer to your computer's manual for specific instructions.
What to do if image output from DVI?D of the computer does not appear on Panasonic PT-RZ970 Projector?
If the image output from DVI-D isn't appearing, check if [EDID SELECT] in [DVI-D IN] is set to [EDID3] or [EDID2:PC]. Updating the graphic accelerator driver of the computer to the latest version or performing the [EDID SELECT] setting in [DVI-D IN] and then rebooting the computer may also help.
General| Power source | AC |
|---|---|
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 1050 W |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 742 W |
| Power consumption (PowerSave) | 617 W |
| Placement | Desktop, Ceiling |
| Product type | Large venue projector |
| Product color | Black |
| Cable lock slot | Yes |
| Native aspect ratio | 16:10 |
| Projection distance | - m |
| Projection technology | DLP |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 50 - 600 \ |
| Projector native resolution | WUXGA (1920x1200) |
| Keystone correction, vertical | ±40 ° |
| Vertical synchronization (max) | 60 kHz |
| Vertical synchronization (min) | 24 kHz |
| Keystone correction, horizontal | ±15 ° |
| Horizontal synchronization (max) | 67.5 kHz |
| Horizontal synchronization (min) | 15.75 kHz |
| Focal length range | - mm |
| Light source type | Laser |
| Service life of light source | 20000 h |
| Service life of light source (economic mode) | 24000 h |
| 3D | No |
| Supported video modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Analog signal format system | - |
| BNC input ports | 6 |
| HDMI connector type | Full-size |
| Serial interface type | RS-232C |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| VGA (D-Sub) ports quantity | 3 |
| Noise level | 41 dB |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
Weight and Dimensions| Depth | 538 mm |
|---|---|
| Width | 498 mm |
| Height | 200 mm |
| Weight | 22400 g |
Essential safety guidelines for handling, installing, and operating the projector to prevent damage and ensure user safety.
Instructions for physically installing the projector, including orientation modes, lens mounting, and initial connections.
Step-by-step guide on powering the projector on and off, including power connections, indicators, and initial settings.
Explains how to navigate the projector's on-screen menu system to access and adjust various settings and functions.
Details on connecting the projector to a network for remote control, monitoring, and software updates.
A guide to diagnosing and resolving common projector problems by checking specific points and referring to relevant pages.
Comprehensive list of the projector's technical specifications, including power, dimensions, and signal compatibility.
