ENGLISH - 15
Features of the Projector
High luminance and high contrast
▶ With a unique optical system which uses
a new-generation laser light source, and
the laser light source drive system, high
luminance of 10 000 lm
*1
and high contrast
of 10 000:1 are achieved even with its
compact size.
*1 A value for PT-RX110. A value for PT-RZ970 and PT-RW930
is 9 400 lm.
Easy and highly exible setup
▶ Easy and exible setup is achieved by
compatibility with DIGITAL LINK and Art-
Net, standard support of 3G-SDI (only for
PT-RZ970), standard support of geometric
adjustment function, 360° installation
support including horizontal, vertical, and
portrait utilizing the characteristics of solid-
state light source, and a lineup of various
optional lenses.
Long life and high reliability
▶ The maintenance cost for long-term
operation is reduced by the unique light
source cooling control technology and
improvement of the dust resistance. Also,
it will contribute to the stable operation by
implementation of the backup function that
will continue the projection by switching to
the backup input signal immediately even
when the input signal is discontinued, in
addition to adopting solid-state light source
which has long life.
Quick Steps
For details, refer to the corresponding pages.
1. Set up the projector.
(x page 32)
2. Connect with external devices.
(x page 50)
3. Connect the power cord.
(x page 57)
4. Switch on the projector.
(x page 58)
5. Make initial settings.
(x page 59)
f Take this step when you switch on the
power for the rst time after purchasing the
projector.
6. Select the input signal.
(x page 68)
7. Adjust the image.
(x page 69)
To Next Page
Loading...
