Cassette Tape firmly into the Cassette Up Ass'y with your left thumb.
4. To install the Power Supply Ass'y to the Main C.B.A.:
Connect connector P1001 and hook the tab of the Shield Case to the slot of the
Main C.B.A. as shown in
Fig. 2-2.
Fig. 2-2
5. When lifting up the VCR Chassis Unit, do not pull up on the Top Plate of the
Cassette Up Ass'y.
6. Model : D, E
When raising or opening the mechanism, place something insulated between the
Hi-Fi Audio/Video Head Amp Ass'y and Audio Jack.
Service Position (2)
Service position (2) is used to check the Mechanism and Electronic Circuits.
12
To Next Page
Loading...
