Panasonic PV-4601 A - 4.1.1.2. DISASSEMBLY METHOD

4.1.1.2. DISASSEMBLY METHOD
Step/Loc.No. Part Fig.No. Remove Note
1 Top Cover D2 2(S-1), 2(S-2) -
2 Power Supply
Ass'y
D3 (S-3), P1001, (L-1) -
3(L-2) 1
3 Bottom Panel D3,D4 (S-3),
(S-4), (S-5), 2(L-3)
-
4 Front Panel
Ass'y
D5 8(L-4), 2
5 Not Used ---- ------------------ -
6 VCR Chassis
Unit
D7 2(S-6), 2(S-7), 2(S-8),
(S-9), (S-10), (S-11),
2(S-12), Chassis
Plate,
2(L-6)
3
7 Main C.B.A. D8 2(S-13), P3501, P2501 -
8 Cassette Up
Ass'y
D9 2(S-14), 2(S-15) 4
9 Mechanism D9 ------------------ 5
↑
↑↑
↑
A
↑
↑↑
↑
B
↑
↑↑
↑
C
↑
↑↑
↑
D
How to read chart shown above :
A:
Order of steps in Procedure
When reassembling, perform the step(s) in the reverse order
These numbers are also used as the identification (location) No. of parts in Figures.
B:
Part to be removed or installed.
C:
Fig. No. showing Procedure or Part Location.
D:
Identification of part to be removed, unhooked, unlocked, released, unplugged,
unclamped, or unsoldered.
2(S-1)=2 Screws(S-1); 3(L-2)=3 Locking Tabs(L-2)
41