Panasonic PV-4601 A - Record On a Tape; One Touch Timer Recording (OTR)

1
1
2
4
REC/TIME
3
Push SPEED to change
current recording speed.
SPEED
Insert a cassette with record tab.
• VCR power comes on
automatically.
STOP
CH0
2
SLP
2
5
Record On a Tape
Push VCR CH / or
NUMBERED keys to
select a channel.
• SP = Standard Play,
LP = Long Play,
SLP = Super Long Play.
VCR
CH
TRACKING
STOP
ZERO/1MIN SLOW PAUSE
REC/TIME
PLAY
PROG
CLEAR
MENU
DISPLAY
123
546
798
0100
PUSH TO
SET
ROTATE TO SELECT
SPEEDVCR/TV
COUNTER
RESET
POWER
REW/
FF/
ADD/DLT
R-TUNE
SAP/Hi-Fi
VCR
CH
TRACKING
DISPLAY
5
3
4
2
4
Check list before you begin.
All connections are made.
VCR is Plugged in.
TV is turned on and set to the VCR
channel (CH3 or CH4).
• Or, push PLAY and REC/TIME on VCR.
• Push PAUSE to pause a recording in progress.
(After the VCR has been in pause mode for 5
minutes, it will stop automatically to protect the
tape and video head.)
Push REC/TIME
to start recording.
1
PAUSE
Multi
Function
Display
• Or, push CH / on
the
VCR .
• To record from an outside
source, push VCR CH
/
to select “LINE”.
5
STOP
• Or, push STOP on the VCR.
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
Continue to push REC/TIME to set the recording length.
Each Push will change the stop time as shown.
• “TIMER” lights in the Multi Function Display.
• The recording time remaining appears if the DISPLAY button
is pushed during OTR mode.
Normal Rec
0:30 1:00
1:302:003:004:00
Push STOP to
stop recording.