Panasonic PV-4601 A - Playback a Tape

REW/
3
FF/
or
4
Push REW or FF to
quickly locate a scene.
• SP mode tapes have a search speed of
9 times and SLP mode tapes 27 times
the normal speed.
•
Some noise bars will appear during search.
Push PLAY to start playback.
Push STOP to
stop playback.
STOP
PLAY
STOP/EJECT
5
Push STOP/EJECT to eject the cassette.
• This button only on VCR.
STOP
ZERO/1MIN SLOW PAUSE
REC/TIME
PLAY
PROG
CLEAR
MENU
DISPLAY
123
546
798
0100
PUSH TO
SET
ROTATE TO SELECT
SPEEDVCR/TV
COUNTER
RESET
POWER
REW/
FF/
ADD/DLT
R-TUNE
SAP/Hi-Fi
VCR
CH
TRACKING
SLOW
PAUSE
2
TRACKING/
V-LOCK
Caution:
Please inspect your cassette tape for
any loose or peeling labels as it may
become jammed in your unit.
Feature for a Quality picture
TRACKING/
V-LOCK
4
2
3
4
PLAY
•
3
2
1
Multi
Function
Display
5
• Playback begins automatically
if cassette has no record tab.
(VCR or Remote Control)
(VCR or Remote Control)
(VCR or Remote Control)
Special Effects During Playback
These features work best in SP or SLP mode. The sound will be muted.
(After the VCR is in the still or slow mode for 3 minutes, it will go into the stop
mode automatically to protect the tape and video head.)
Slow Motion Playback
Push SLOW to start and PLAY or SLOW to release the Slow mode.
Still (Freeze) Frame Picture
Push PAUSE to freeze and release the picture.
• To reduce picture noise:
Place the VCR in Slow motion mode. Use TRACKING
/ to clear up
the picture, then Push PAUSE.
Frame by Frame Advance
While in Still mode, hold down the SLOW button to advance the still
picture one frame at a time. Push PAUSE to release.
Digital Auto Picture
This feature automatically controls the video output signal for less
noise depending on the tape condition.
Digital Auto Tracking
This feature continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control
Use during Playback and Slow Motion mode to reduce picture noise.
Push
VCR CH (TRACKING) / buttons until the picture clears up.
To return to Auto Tracking mode, push
POWER off and then on again.
V-Lock Control
In Still mode, the
VCR CH (TRACKING) / buttons operate as a
V-Lock control to reduce jitter. Push
/ until the picture is stabilized.
Playback a Tape
1
Our Vacation
• VCR power comes on automatically.
Insert a cassette.
Check list before you begin
All connections are made.
TV and VCR are plugged in.
TV is turned on and set to the VCR
channel (CH 3 or 4).
This indicator lights in the
Multi Function Display.
VCR