Model : D, E
Equipped with dbx ® -TV Noise Reduction for true MTS reproduction. dbx ® -TV
Noise Reduction is required for good stereo separation and audio fidelity.
3. SUMMARY
3.1. BASIC OPERATIONS
3.2. HELPFUL SERVICE NOTES AND CAUTIONS (Please read)
3.2.1. Simplified Fault Finding Data
Simplified Self-Diagnostic System facilitates finding the cause of the fault. A 4 digit
fault code will be displayed in F.I.P.
The Simplified Fault finding data is memorized for approximately 12 hours. This data
is cleared after it is displayed and then the Power button is pressed back on.
1. With power turned off, press FF button on VCR for over 3 seconds as shown in
Fig.
1-1.
Fig. 1-1
2. Fault code (4 digit number) will be displayed in F.I.P. as shown in Fig. 1-2 and Fig.
1-3.
7
To Next Page
Loading...
