Panasonic PV-A208 - Supplying Power; Charge the Battery Pack; Use the Battery Pack

Supplying
Power
Charge the
Battery
Pack
Charge
the
Battery
Pack fully
before
operation.
POWER
Lamp
CHARGE
Lamp
Battery
Charging
Confirmation
Marker
Use this
marker as a
reminder
to
yourself
when the
battery is fully
charged or
in need
of a
charge.
This
marker
performs no
function
and is for
your
reference only.
Plug in the AC
Adaptor.
POWER
Lamp
lights.
Insert
the Battery
®
Align the right
side
of the
Battery
with
the
line
on
the AC
Adaptor.
®
Press
the Battery
down
and slide
it
in
the
direction of
the arrow.
CHARGE
Lamp lights.
When
charging is
done
(about one
hour) the
lamp goes
out.
Remove
the Battery
Slide the
Battery
out and lift up.
•
The useful
operation time
of the
Battery
will
gradually
decrease after
repeated
use and
recharging. The
Battery is
no longer
serviceable
if the operation
time is
very short,
even
after a
sufficient
charge.
Note:
After
recharging the Battery
Pack
about 5 times,
use
the
BATTERY
REFRESH
feature
as
explained on
page 10.
Use
the Battery
Pack
With
a fully
charged Battery
Pack,
you will have a
maximum of about 1
hour
of
continuous
use. (The
actual
operating time may
vary due to
operation
conditions.)
Attach
the Battery
®
Align the
Battery
with the top of the
mounting
surface.
<D
Press
it into
place until
it locks
with a
click.
2
Remove the Battery
J
While
sliding
the
BATTERY RELEASE
button,
remove
the Battery.