44
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Running the Software
PHOTOVU LINK:
You can transfer images from your
Palmcorder tape to your PC.
1 Turn your PC (Personal Computer) on
and start up Windows.
2 Insert PHOTOVU LINK DRIVER Disk
(Optional) into a floppy disk drive.
3 Click on Start, then “Run
……
……
…”
4 Type in “a:\setup.exe” and click OK.
• If your 3.5 inch floppy disk drive is not
“A”, use the appropriate letter.
5 Follow the instructions as they appear
on the PC screen until the installation
is complete.
• Setup window will disappear when
the installation is complete.
1Click on Start, “Programs,”
“Panasonic,” “Palmcorder,” then
“PHOTOVU LINK.”
2“PHOTOVU LINK” is opened.
• COM Port and Baudrate are automatically
selected.
Refer to Help for information about
application operations and other Error
messages.
Note
Before you begin
• Insert the Tape. (p. 9)
• Make Palmcorder-PC connections.
(p. 43)
• Turn your PC on.
• Set Palmcorder POWER to VCR.
PHOTOVU LINK
DV52.p42-45.p65 02/05/28, 10:3744
To Next Page