43
Playback Mode
To Make the Indications Appear on the TV
Screen
Press the [OSD] Button
51
on the Remote Control.
Playing Back on Your TV
By connecting your Camcorder with your TV, the
recorded scenes can be viewed on your TV screen.
• Before connecting them, turn off the power of both
the Camcorder and TV.
1 Connect the [AV OUT] Jack of the Camcorder
and the Video and Audio Input Jacks of the
TV.
• Connect to the TV with the AV Cable
1
. If the TV
has an S-Video Jack, connect the S-Video Cable
(not supplied)
2
, too (PV-GS15 Only).
• When plugging the pin plug of the AV cable into
the [AV OUT] Jack, plug it in as far as it goes.
• For other notes concerning this item, see page 65.
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
12
(PV-GS15 Only)
51
To Next Page
Loading...
