EasyManua.ls Logo

Panasonic PV-GS15 - Editing Mode; Transferring Content Between Media; Audio Dubbing and DV Cable Recording

Panasonic PV-GS15
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
Editing Mode
Editing Mode
Recording from a Tape onto a Card (For
PV-GS13/PV-GS15)
Still pictures can be recorded on the Memory Card
from scenes that have already been recorded on a
cassette.
1 Set the Mode Dial
40
to Tape Playback Mode.
2 Start playback and set the Camcorder to Still
Playback Mode at the scene you wish to
record, and press the [PHOTO SHOT] Button
36
.
For other notes concerning this item, see page 65.
Audio Dubbing (Remote Control Only)
You can add music or narration to the recorded
Cassette.
If the tape recorded in the [16bit] Mode is dubbed
with the Audio Dubbing function, the original sound
is erased. (If you wish to preserve the original sound,
use the [12bit] Mode when recording.)
Audio Dubbing cannot be performed on a recording
made in LP Mode. (p. 23)
1 Press the [ ] Button
69
on the Remote
Control where you want to add new sound.
2 Press the [A.DUB] Button
55
on the Remote
Control.
3 To start Audio Dubbing, press the [
] Button
69
on the Remote Control.
To Cancel Audio Dubbing
Press the [
] Button
69
on the Remote Control.
The Camcorder is in the Still Playback Mode again.
To Play Back the Sound Recorded by 12bit
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK] >>
[12bit AUDIO] >> [ST1], [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Dubbing.
MIX: It plays back both the original sound and the
sound added by Audio Dubbing
simultaneously.
40
69
55
Recording Pictures from a Card onto
a Tape (For PV-GS13/PV-GS15)
Card Images can be recorded to the Tape.
1 Set the Mode Dial
40
to Picture Playback
Mode.
2 Display the rst picture.
3 Press the [PHOTO SHOT] Button
36
.
During the copying, the following Indication
appears.
When recording to tape, select the tape position
before recording. The picture will be recorded to the
tape position when the [PHOTO SHOT] Button is
pressed at Step 3.
Photoshot index signals are automatically recorded.
36
40
36
It takes a few seconds to record a picture to the
Tape.

Table of Contents

Related product manuals